Dry Carbon Fiber Cold Air Intake System for Toyota GR Yaris GXPA16
Vehicle Fitment:
- 2020–2023 Toyota GR Yaris (Gen 1)
- 2024–2026 Toyota GR Yaris (Gen 2)
Payment and security
[KEY FEATURES]
• 100% Autoclave Pre-Preg Dry Carbon Fiber: Cured under intense heat and pressure in an autoclave for unmatched thermal barrier efficiency, extreme strength, and ultra-lightweight construction.
• Aerodynamic Venturi Airbox Architecture: Engineered with an inverted conical high-flow filter inside a smooth-contoured venturi housing to dramatically reduce airflow turbulence.
• Sealed Cold Air Ducting: Front-facing carbon air scoop captures dense, pressurized ambient air directly from behind the front grille, completely isolating intake air from hot engine bay heat soak.
• Integrated CNC MAF Sensor Mount: Precision-machined MAF (Mass Air Flow) sensor boss ensures accurate fuel trim readings, consistent idle stability, and CEL-free (Check Engine Light) operation.
• High-Flow Washable Filter Element: Multi-layer synthetic cotton gauze filter maximizes induction volume and flow velocity while delivering superior filtration against dirt and particulates.
[PERFORMANCE BENEFITS]
• Measurable Horsepower & Torque Gains: Delivers substantial gains across mid-to-high RPM range by reducing induction resistance and lowering intake air temperatures (IATs).
• Sharper Throttle Response: Smooth internal carbon wall geometry eliminates restrictions found in corrugated factory intake piping for instantaneous turbo spool.
• Aggressive Turbo Induction Sound: Enhances turbo spool noise, diverter valve acoustics, and induction roar without excessive cabin drone.
• Thermal Heat Soak Isolation: Autoclave dry carbon acts as a natural heat shield, keeping charge air cooler under continuous high-load track or spirited driving conditions.
[WHAT'S IN THE BOX]
• 1x Dry Carbon Fiber Aerodynamic Venturi Airbox Housing
• 1x Dry Carbon Fiber Front Radiator Air Scoop / Duct
• 1x Dry Carbon Fiber Intake Inlet Tube (with Integrated MAF Boss)
• 1x High-Flow Washable Conical Air Filter
• 1x Set of Laser-Cut Mounting Brackets & Hardware
• Stainless Steel Clamps & Silicone Couplers
[VEHICLE FITMENT]
• Compatible with: Toyota GR Yaris (GXPA16 / MXPA12 3-Door Hatchback)
• Engine: 1.6L G16E-GTS Turbocharged 3-Cylinder AWD
• Fitment Note: Direct bolt-on replacement for factory airbox and intake piping. Compatible with both OEM and aftermarket front cooling slam panels.
[INSTALLATION GUIDELINES]
• Preparation: Disconnect negative battery terminal and ensure engine is completely cold before starting.
• Disassembly: Unplug MAF sensor harness, loosen hose clamps, and remove factory airbox, intake duct, and inlet hose.
• MAF Sensor Transfer: Carefully transfer OEM MAF sensor to the carbon intake tube's integrated sensor boss using provided hardware.
• Assembly & Alignment: Position carbon front duct and airbox housing onto factory mounting grommets with supplied laser-cut brackets; connect silicone couplers and clamps loosely.
• Final Torque & Inspection: Verify clearances around engine bay lines and hood closure before fully tightening all clamps and reinstalling the MAF harness.
PM-GRY-IN-PM-DCF
100% Autoclave Pre-Preg Dry Carbon Fiber (3K 2x2 Twill Weave, Thermal-Resistant High-Gloss Clear Coat), Aluminum MAF Sensor Boss, Multi-Layer Cotton Gauze High-Flow Air Filter, Powder-Coated Steel Mounting Brackets.
• 1x Dry Carbon Fiber Aerodynamic Venturi Airbox Housing
• 1x Dry Carbon Fiber Front Radiator Air Scoop / Duct
• 1x Dry Carbon Fiber Intake Inlet Tube (with Integrated MAF Boss)
• 1x High-Flow Washable Conical Air Filter
• 1x Set of Laser-Cut Mounting Brackets & Hardware
• Stainless Steel Clamps & Silicone Couplers